How to Measure Your Area

Accurately measuring the area, you plan to cover with turf is essential for purchasing the correct amount. Precise measurements will ensure you buy just the right amount and avoid unnecessary excess or shortages. Follow these easy steps to measure your area correctly.

Step 1: Identify the Shape of the Area
First, assess the shape of the area to be covered. Common shapes include:
- Rectangular or Square: The most straightforward measurement.
- Circular: Requires a few extra steps but can be easily calculated.
- Triangular: Requires a few extra steps but can be easily calculated.
- Irregular Shape: Can be divided into smaller, more manageable sections.

Step 2: Measure the Dimensions
For Rectangular or Square Areas:



- Length: Measure the distance along the longest side of the area.
- Width: Measure the distance across the shortest side.

Multiply the length by the width to calculate the area in square feet or square meters.
Formula:
Area=Length×Width
Example – If the height is 8 meters and the width is 3 meters ; 8m x 3m = 24m 2

For Circular Areas:

- Radius: Measure the diameter of the circle, then divide this by two to calculate the
radius.
For a circle, use the formula:
Multiply the radius by itself, then multiply the total by 3.14.
(Area = r x r x 3.14)
Example – If the diameter is 22 metres, the radius will be 11 metres; multiply 11 metres
by 11 metres, then multiply the total by 3.14: 11 x 11 = 121 x 3.14 = 379.94m 2

For Triangular Areas:

- Base: Measure the length of the base and divide by two.
Measure the height and base then multiply the height by half of the base (area = ½b x h)
Example – If the height is 3 metres and the base is 15 metres: 3m x 7.5m = 22.5m 2

For Irregular Shapes:
- Break the area into smaller, measurable sections (rectangles, triangles, or circles).
- Measure the dimensions of each smaller section.
- Calculate the area for each section using the appropriate formula, then add them
together for the total area.

Step 4: Account for Edges and Overlaps
When measuring, make sure to include any areas that may be difficult to measure directly, such as corners or edges that taper off. It’s also recommended to add about 5-10% extra to the total area measurement to account for slight adjustments during installation and potential overlaps.